| Most common failures | No# failures |
|---|
| Registration plate issues | 62 |
| Headlamp aim out of alignment | 59 |
| Rear reflector on motorcycle missing |1.4.1| | 47 |
| Horn not working |1.7.3a| | 24 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 23 |
| Front wheel bearings have excessive free play |2.3.5b| | 19 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 15 |
| Rear Wheel spoke excessively loose |4.2.1b| | 13 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 9 |
| Front wheel bearings are excessively rough |2.3.5b| | 9 |
| Rear reflector missing (4.8.2 (a) (ii)) | 9 |
| Registration plate lamp issues | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
| Drive chain excessively loose |6.2.1d| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 4 |
| Headlamp aim not tested |1.6| | 4 |
| Throttle operating incorrectly |6.2.1f| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front Wheel spoke excessively loose |4.2.1b| | 4 |
| Rear Position lamp not working |4.2.1 |a|| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 3 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Front Wheel excessively distorted |5.2.2 |c| |i|| | 2 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 2 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Front wheel spindle loose |2.3.3a| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Brake lever attachment screws missing |3.1.2b| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Horn replaced by a siren |1.7.3b| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| An item not tested |Manual| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Horn missing |1.7.1| | 1 |
| Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
| Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Brake lever attachment screws loose |3.1.2b| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Rear Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Wheel spoke cracked. |4.2.1b| | 1 |
| Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Nearside Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear reflector on sidecar missing |1.4.1| | 1 |
| Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Rear Upper Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i|| | 1 |
| Centre Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Offside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front Indicator switch does not operate the direction indicators on the side selected indicators have been removed but switch still fitted |1.5.4| | 1 |
| Horn not working switch still fitted |1.7.3a| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts not clipped onto upper fork |3.2.B2c| | 1 |
| Front Brake hose fouling |3.2.B3b| | 1 |
| Front Headlamp aim not tested not working |1.6| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Direction indicators not working none fitted but switch still fitted |1.5.1c| | 1 |
| Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
| Centre Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Centre Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Front Upper Horn not working |1.7.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Nearside Inner Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
| Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Centre Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Headlamp light intensity severely reduced both beams on at the same time (4.1.4 (a)) | 1 |
| All direction indicators missing all (4.4.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment brake lever touches handlebar when operated. (1.1.15 (f)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Central Rear Position lamp not working (4.2.1 (a)) | 1 |
| Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front wheel bearings have excessive free play (2.3.5b) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Central Rear Stop lamp not working Front brake lever (4.3.1 (a) (ii)) | 1 |