Most common failures | No# failures |
---|
Registration plate issues | 67 |
Headlamp aim out of alignment | 42 |
Rear reflector on motorcycle missing |1.4.1| | 33 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 25 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 21 |
Rear Wheel spoke excessively loose |4.2.1b| | 18 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
Front wheel bearings have excessive free play |2.3.5b| | 15 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 12 |
Horn not working |1.7.3a| | 11 |
Front Wheel spoke excessively loose |4.2.1b| | 10 |
Front wheel bearings are excessively rough |2.3.5b| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Exhaust has part of the system missing |7.1.1a| | 3 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Front Position lamp not working (4.2.1 (a)) | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Wheel spoke missing |4.2.1b| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
An item not tested |Manual| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Headlamp aim not tested |1.6| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear reflector on sidecar does not face squarely to the rear |1.4.1| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Central Rear Lower Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Throttle operating incorrectly sticking |6.2.1f| | 1 |
Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Stop lamp obscured |1.3.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Wheel fractured significantly reducing the original strength |4.2.1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Drive chain sprocket worn to excess hooked teeth. |6.1.7 |c| |i|| | 1 |
Throttle operating incorrectly NOT SHUTTING PROPERLY |6.2.1f| | 1 |
Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Centre Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel spoke excessively loose x4 |4.2.1b| | 1 |
Front Wheel spoke excessively loose x1 |4.2.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Wheel spoke excessively loose one on rear wheel. |5.2.2 |d|| | 1 |
Front Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Brake hose damaged | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front suspension assembly component loose headbearing nut loose |2.3.1| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front Wheel has an excessively eccentric bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain locking device fitted wrong way |6.2.1h| | 1 |
Offside Rear Lower Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.1f| | 1 |
Centre Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel insecure |4.2.3b| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Offside Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Nearside Motorcycle structure cracked |6.1.1a| | 1 |
Front Horn missing |1.7.1| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Horn not working |1.7.3a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Brake component insecure |1.1.21 |c|| | 1 |
Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Headlamp reflector seriously defective |4.1.1 |b| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Brake locking device missing split pin |3.2.A1e| | 1 |
Direction indicator missing all missing |1.5.1a| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Wheel spoke excessively loose |5.2.2 |d|| | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Registration plate lamp issues | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Rear reflector likely to become detached (4.8.1 (b) (ii)) | 1 |
Central Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim not tested Inoperative (4.1.2 (b)) | 1 |
Front Brake disc significantly and obviously worn Below min thickness (1.1.14 (a) (i)) | 1 |
Rear Brake disc significantly and obviously worn Below min thickness (1.1.14 (a) (i)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Horn sound not in accordance with requirements not working with lights on (7.7 (c)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Headlamp light intensity severely reduced main beam (4.1.4 (a)) | 1 |
Rear Brake effort inadequate at a wheel no reserve travel & poor effort (1.2.1 (a) (i)) | 1 |
Rear Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Suspension arm pin or bush excessively worn swinging arm bearings worn (5.3.4 (a) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Drive chain worn to excess Several links seized/stiff (6.1.7 (c) (i)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |