Most common failures | No# failures |
---|
Headlamp aim out of alignment | 113 |
Rear reflector on motorcycle missing |1.4.1| | 72 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 51 |
Drive chain excessively loose |6.2.1d| | 34 |
Drive chain worn to excess |6.2.1e| | 33 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 29 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 21 |
Registration plate issues | 20 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 19 |
Exhaust is leaking and excessively noisey |7.1.1b| | 19 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 16 |
Rear reflector on motorcycle obscured |1.4.1| | 16 |
Horn not working |1.7.3a| | 16 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 15 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 13 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 13 |
Throttle operating incorrectly |6.2.1f| | 13 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 13 |
Registration plate lamp issues | 13 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 12 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 9 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 9 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 8 |
Handlebar deformed |2.1.1b| | 8 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 8 |
Drive chain excessively tight |6.2.1d| | 8 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Nearside Rear Direction indicator not working |1.5.1c| | 7 |
Rear Drive chain excessively loose |6.2.1d| | 7 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Front Brake excessively binding (1.2.1 (f)) | 7 |
Front Drive chain sprocket worn to excess |6.2.1e| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Offside Rear Direction indicators not working |1.5.1c| | 6 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 6 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 5 |
Front Wheel spoke excessively loose |4.2.1b| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
Headlamp insecure |1.2.3b| | 4 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Offside Rear Footrest missing |6.2.1a| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 4 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear Direction indicator not working |1.5.1c| | 3 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
An item not tested |Manual| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Offside Rear Footrest insecure |6.2.1a| | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Rear Wheel spoke missing |4.2.1b| | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 3 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
All direction indicators not working (4.4.1 (a) (ii)) | 3 |
Horn not working (7.7 (a)) | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Drive chain sprocket worn to excess |6.2.1e| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Brake master cylinder insecure lever pivot snapped |1.1.10 |c|| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
Rear Wheel spoke cracked. |4.2.1b| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Exhaust system insecure (6.1.2 (a)) | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |