Most common failures | No# failures |
---|
Registration plate issues | 17 |
Headlamp aim out of alignment | 10 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Horn not working |1.7.3a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Registration plate lamp issues | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Rear Brake caliper|s| insecure |3.2.A1j| | 2 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Front Direction indicators not working |1.5.1c| | 1 |
Offside Throttle operating incorrectly |6.2.1f| | 1 |
Rear Stop lamp likely to become detached |4.3.1 |c| |ii|| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Direction indicator insecure right |1.5.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Brake performance not tested |3.3| | 1 |
An item not tested |Manual| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Fork yoke insecure (2.2.2 (d) (i)) | 1 |
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |