| Most common failures | No# failures |
|---|
| Registration plate issues | 25 |
| Rear reflector on motorcycle missing |1.4.1| | 17 |
| Headlamp aim out of alignment | 15 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 11 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Front Wheel spoke excessively loose |4.2.1b| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Rear Wheel spoke excessively loose |4.2.1b| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Horn not working |1.7.3a| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Registration plate lamp issues | 2 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
| All position lamps not working (4.2.1 (a)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Front Horn is not a constant note |1.7.3c| | 1 |
| All position lamps adversely affected by the operation of the horn |1.1.3b| | 1 |
| Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| Front Wheel damaged or distorted to the extent that control of the motorcycle is likely to be adversely affected rim bent |5.2.2 |c| |ii|| | 1 |
| Headlamp aim not tested could not start bike |4.1.2 |b|| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Stop lamp remains on when the brake is released front lever catching hand guard |1.3.1e| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Rear Lower Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Upper Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Wheel spoke excessively bent |4.2.1b| | 1 |
| Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Horn missing |1.7.1| | 1 |
| Centre Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Stop lamp affected by the operation of the horn |1.3.2| | 1 |
| Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear spring incomplete |2.4.A1b|i|| | 1 |
| Horn sound not in accordance with requirements not loud enough (7.7 (c)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake disc contaminated covered in oil (1.1.14 (b)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Suspension arm pin or bush excessively worn swinging arm bearings excessive play (5.3.4 (a) (i)) | 1 |
| Rear Brake pedal pivot has excessive free play (1.1.1 (b)) | 1 |
| Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Motorcycle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |