Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim out of alignment | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Horn not working |1.7.3a| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Horn missing |1.7.1| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Drive chain worn to excess |6.2.1e| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Brake performance not tested |3.3| | 1 |
Rear Braking system does not have an approriate system/s fitted according to its age |3.1.1| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Exhaust has part of the system missing |7.1.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Nearside Inner Rear Lower Footrest missing |6.2.1a| | 1 |
Offside Rear Lower Footrest missing |6.2.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |