| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 24 |
| Rear reflector on motorcycle missing |1.4.1| | 17 |
| Registration plate issues | 11 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Offside Rear Direction indicator not working |1.5.1c| | 4 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Drive chain fouling another component |6.2.1d| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Brake locking device insecure |3.2.A1e| | 2 |
| Horn not working |1.7.3a| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Rear Position lamp light intensity significantly reduced |4.2.3 |a| |ii|| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Fuel pipe leaking |7.2.1a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front suspension assembly component excessively bent |2.3.1| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Registration plate lamp issues | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls Not Working From Front Control -Re Position Switch Now Working (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Central Rear Lower Suspension arm pin or bush excessively worn mono shock link. (5.3.4 (a) (i)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |