| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Wheel corroded significantly reducing the original strength |4.2.1a| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Wheel corroded significantly reducing the original strength |4.2.1a| | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Brake back plate|s| insecure |3.2.A1j| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Riders seat insecure rear lugs broken (6.2.5 (a) (ii)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Central Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |