Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
Horn not loud enough to be heard by another road user |1.7.3a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Horn not working |1.7.3a| | 7 |
Registration plate issues | 6 |
Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 5 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 4 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
Drive chain excessively tight |6.2.1d| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Front Horn not working |1.7.3a| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Horn is not a constant note |1.7.3c| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 2 |
Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Brake lever mounting insecure |3.1.2a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Footrest insecure |6.2.1a| | 1 |
Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear Rear suspension component loose |2.4.A.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear suspension component seized |2.4A2a|ii|| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Direction indicators affected by the operation of another lamp battery flat |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies battery flat |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies battery flat |1.3.1a| | 1 |
Headlamp aim not tested not bright enough to see a pattern |1.6| | 1 |
Steering control fouling between components which interferes with the free movement of the steering fouling cables on right hand lock |2.1.2a| | 1 |
Front Brake locking device insecure cable lock nut not tight |lower| |3.2.A1e| | 1 |
Headlamp aim not tested led bulb fitted-no pattern |1.6| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Floor brake test indicates a sticking brake hub arm seized |3.3.C2c| | 1 |
Front Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Brake pedal is bent and the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
An item not tested |Manual| | 1 |
Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Front position lamp does not illuminate immediately when switched on not working |1.1.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Built up wheel has a loose bolt/s |4.2.1c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Rear mono-shock insecure |2.4.B.4| | 1 |
Footrest missing |6.2.1a| | 1 |
Nearside Headlamp switch insecure |1.2.4| | 1 |
Nearside Steering lock stop maladjusted |2.1.3| | 1 |
Offside Steering lock stop maladjusted |2.1.3| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Rear spring worn and seriously weakened |2.4A1b|ii|| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Lower Rear mono-shock insecure |2.4.B.4| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake cable excessively corroded |3.2.A1b| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Direction indicator not working all |1.5.1c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Wheel spoke missing |4.2.1b| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Brake drum|s| securing bolt|s| loose |3.2.A1g| | 1 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Front Wheel excessively distorted |5.2.2 |c| |i|| | 1 |
Central Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Wheel spindle loose no locking device (5.2.1 (c) (i)) | 1 |
Front Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Footrest insecure (6.2.12 (a)) | 1 |
Rear Brake linkage has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Motorcycle structure is deformed and structural rigidity is significantly reduced (stand.) (6.1.1 (a) (i)) | 1 |
Fuel pipe so insecure there is a risk of fire (6.1.3 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake component insecure (1.1.21 (c)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |