Most common failures | No# failures |
---|
Headlamp aim out of alignment | 35 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Registration plate lamp issues | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 10 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Stop lamp remains on when the brakes are released | 3 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Registration plate issues | 2 |
Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
All direction indicators not working (4.4.1 (a) (ii)) | 2 |
Front Lower Exhaust is leaking and excessively noisey downpipe |7.1.1b| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Centre Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Exhaust has part of the system missing |7.1.1a| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Centre Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
All position lamps not working |4.2.1 |a|| | 1 |
Horn not working |1.7.3a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Brake component is severely distorted |3.1.5| | 1 |
Rear Stop lamp insecure |1.3.3b| | 1 |
Handlebar handgrip not secure to handlebars. l/h |2.1.1c| | 1 |
Throttle operating incorrectly not returning |6.2.1f| | 1 |
Footrest missing both rear |6.2.1a| | 1 |
Roller brake test indicates a severely grabbing brake front discs |3.3.A1b| | 1 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake component is severely distorted |3.1.5| | 1 |
Nearside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering hand gaurds catches the screen |2.1.2a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Nearside Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Rear Brake caliper inadequately mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Throttle operating incorrectly grip loose and turning |6.2.1f| | 1 |
Direction indicators not working not working immediately |1.5.1c| | 1 |
Nearside Front shock absorber seal failed and leaking oil fork seal |2.3.3| | 1 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp aim beam image kick up to the offside both |1.6| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front Brake component is severely distorted |3.1.5| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Brake caliper inadequately mounted rubber boot worn and pad carrier missing |1.1.16 |c| |i|| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Lower Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Fuel hose leaking |7.2.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen Beam image distorted (4.1.2 (a)) | 1 |
Front Stop lamp not working front control (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust silencer insecure collector pipe to downpipe clamp broken (8.1.1 (b) (i)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Front Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
Throttle operating incorrectly (6.2.1f) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Stop lamp not working front control (4.3.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Not Working From Front Control (4.3.2 (a) (iii)) | 1 |
Brake performance not tested Excessive Binding On Front Brake (1.2.1 (g)) | 1 |
Headlamp aim projected beam image obviously incorrect both (4.1.2 (c)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |