Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Registration plate issues | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Horn not working |1.7.3a| | 2 |
Stop lamp affected by the operation of the horn horn and brake light interact |1.3.2| | 2 |
Direction indicators not working when using horn indicators stop working |1.5.1c| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Nearside Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Front suspension assembly component loose |2.3.1| | 1 |
Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Front wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator insecure |1.5.3b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Motorcycle structure excessively corroded front main frame |6.1.1a| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Centre Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Direction indicators not working |1.5.1c| | 1 |
Centre Rear Direction indicators not working |1.5.1c| | 1 |
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Centre Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Outer Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Centre Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Outer Rear Drive chain excessively loose |6.2.1d| | 1 |
Centre Rear Brake performance not tested |3.3| | 1 |
Centre Front Brake performance not tested |3.3| | 1 |
Gradient brake test No brake control achieves an efficiency of 30%. |3.3.D1a| | 1 |
Gradient brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.D1b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Brake cylinder severely corroded |3.2.B1b| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Offside Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Centre Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Centre Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Fuel cap leaking |6.1.3 |b| |i|| | 1 |
Nearside Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Offside Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Horn not working |1.7.3a| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Centre Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Upper Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |