Most common failures | No# failures |
---|
Headlamp aim out of alignment | 43 |
Registration plate lamp issues | 23 |
Registration plate issues | 21 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 20 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 20 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 17 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 15 |
Front Brake excessively binding (1.2.1 (f)) | 10 |
Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Stop lamp not working (4.3.1 (a) (ii)) | 10 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 9 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 8 |
Front Brake disc|s| excessively worn |3.2.A1l| | 8 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 7 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Stop lamp remains on when the brakes are released | 7 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Riders seat insecure (6.2.5 (a) (ii)) | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 5 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Front Brake excessively binding |1.2.1 |f|| | 5 |
Riders seat insecure |6.2.1a| | 4 |
Front brake disc in such a condition that it is seriously weakened | 4 |
Front Position lamp not working (4.2.1 (a)) | 4 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 4 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 4 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 4 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 3 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 3 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
Headlamp insecure (4.1.1 (c)) | 3 |
Headlamp insecure |1.2.3b| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 3 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Headlamp aim not tested (4.1.2 (b)) | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 2 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Central Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 2 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 2 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 2 |
Rear Brake grabbing severely (1.2.1 (c)) | 2 |