Most common failures | No# failures |
---|
Headlamp aim out of alignment | 25 |
Registration plate lamp issues | 11 |
Registration plate issues | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Horn not working (7.7 (a) (ii)) | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Horn not working |1.7.3a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Motorcycle structure excessively corroded Swing-arm heavily corroded |6.1.1a| | 1 |
Direction indicators not working Left hand rear indicator not functioning |1.5.1c| | 1 |
Throttle operating incorrectly Throttle sticks on r/h lock |6.2.1f| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front position lamp missing Bulb within headlight missing. |1.1.1a| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Offside Direction indicators not working front and rear |1.5.1c| | 1 |
Rear Lower Motorcycle structure excessively corroded suspension swing arm |6.1.1a| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Motorcycle structure cracked |6.1.1a| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Headlamp light intensity severely reduced Light source (4.1.4 (a)) | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Brake pipe excessively corroded | 1 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible LED HEADLIGHT UNIT (4.1.4 (c)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen BEAM PATTERN DOES NOT CONFORM (4.1.2 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Brake pedal anti-slip provision missing (1.1.2 (c)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Riders seat missing (6.2.5 (a) (ii)) | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Stop lamp not working AND REAR (4.3.1 (a) (ii)) | 1 |
Rear Suspension arm corroded and seriously weakened swing arm (5.3.3 (b) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Offside Rear Lower Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition exhaust is excessively loud (8.1.1 (a)) | 1 |