Most common failures | No# failures |
---|
Headlamp aim out of alignment | 77 |
Registration plate issues | 34 |
Rear reflector on motorcycle missing |1.4.1| | 30 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 14 |
Horn not working |1.7.3a| | 11 |
Drive chain excessively loose |6.2.1d| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 9 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Drive chain excessively tight |6.2.1d| | 7 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 6 |
Nearside Rear Direction indicator not working |1.5.1c| | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp aim beam image kick up to the offside |1.6| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear Brake disc|s| cracked |3.2.A1g| | 4 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 3 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 3 |
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 3 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Offside Motorcycle structure cracked |6.1.1a| | 2 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Nearside Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Offside Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Brake component is severely distorted |3.1.5| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 2 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 2 |
Horn not working (7.7 (a)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |