Most common failures | No# failures |
---|
Registration plate issues | 14 |
Headlamp aim out of alignment | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Drive chain excessively loose |6.2.1d| | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Wheel spindle loose |5.2.1 |c| |i|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Throttle operating incorrectly Throttle was not rolling back on its own |6.2.1f| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Suspension component pin or bush excessively worn drive cush bushes (5.3.4 (a) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear Brake back plate insecure Split pin missing. (1.1.14 (d)) | 1 |
Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
Brake excessively binding (1.2.1 (f)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Brake pivot has restricted free movement brake lever not pulling back smoothly on pivot bolt (1.1.15 (e)) | 1 |