Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Registration plate issues | 12 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 3 |
Registration plate lamp issues | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Horn not working |1.7.3a| | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Front Throttle operating incorrectly Sticking, will not all ways close on its own |6.2.1f| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Motorcycle structure excessively corroded |6.1.1a| | 1 |
Seat insecure |6.2.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Offside Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Upper Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Throttle operating incorrectly throttle sticking on bars right |6.2.1f| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Headlamp lens seriously defective |4.1.1 |b| |ii|| | 1 |
Headlamp not working on dipped beam incorrect wiring |4.1.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator light intensity significantly reduced |4.4.3 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition v+h no baffles |8.1.1 |a|| | 1 |
Fuel tank leaking fuel tap |6.1.3 |b| |i|| | 1 |
Brake clevis joint insecure locking pin missing |1.1.15 |c|| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Position lamp not working side light in-op (4.2.1 (a)) | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition NO BAFFLES IN EXHAUST (8.1.1 (a)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp does not illuminate immediately a brake applies opp 1 |1.3.1a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Suspension component corroded and seriously weakened (5.3.3 (b) (i)) | 1 |