| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 39 |
| Throttle operating incorrectly |6.2.1f| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Horn not working |1.7.3a| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 6 |
| Motorcycle structure excessively corroded |6.1.1a| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Registration plate issues | 4 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Registration plate lamp issues | 3 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Offside Front Footrest insecure |6.2.1a| | 2 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Front Handlebar deformed |2.1.1b| | 2 |
| Offside Front Throttle operating incorrectly |6.2.1f| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Rear Brake excessively binding |1.2.1 |f|| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Offside Rear Footrest insecure |6.2.12 |a|| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Horn not working fuse blown |1.6.2a| | 1 |
| Offside Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Centre Rear Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear brake binding | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Nearside Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a| | 1 |
| Offside Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Nearside Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Brake hose damaged | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Headlamp switch insecure |1.2.4| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| An item not tested |Manual| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Front Sidecar direction indicator not working |1.5.1c| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies Sidecar stop light not working! |1.3.1a| | 1 |
| Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Offside Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Brake pipe excessively damaged |3.2.B2a| | 1 |
| Stop lamp deteriorated and function impaired Foot |1.3.3a| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Centre Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Plate brake test No brake control achieves an efficiency of 30%. |3.3.B2a| | 1 |
| Rear Rear fog lamp missing |1.3.2a| | 1 |
| Hazard warning switch missing |1.4.B.1d| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear suspension component excessively corroded. swinging arm |2.4.A.1a| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Offside Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Front wheel insecure |4.2.3b| | 1 |
| Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Nearside Front Motorcycle structure cracked |6.1.1a| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear brake anchor arm split pin missing. |6.2.1h| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Centre Rear Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Stop lamp missing |1.2.1a| | 1 |
| Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Horn not working refit wire |1.6.2a| | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Offside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork leg leaking oil (5.3.2 (b)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Nearside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Brakes imbalanced across an axle | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Rear Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Rear Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases hole in silencer (6.1.2 (a)) | 1 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Swing arm (6.1.1 (c) (i)) | 1 |