Most common failures | No# failures |
---|
Headlamp aim out of alignment | 46 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Throttle operating incorrectly |6.2.1f| | 7 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Rear reflector on motorcycle missing |1.4.1| | 5 |
Horn not working |1.7.3a| | 5 |
Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 4 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear suspension component excessively corroded. |2.4.A.1a| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Registration plate issues | 3 |
Offside Rear Footrest insecure |6.2.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Rear Footrest insecure |6.2.1a| | 2 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Direction indicators not working |1.5.1c| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Steering lock stop ineffective |2.1.3| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 2 |
Registration plate lamp issues | 2 |
Rear suspension component excessively corroded. swinging arm centre brace |2.4.A.1a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Rear Exhaust mounting missing |7.1.1c| | 1 |
Brake fluid reservoir leaking hydraulic fluid cap slack |3.2.B1e| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Fuel pipe union leaking |7.2.1a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Outer Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Rear Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
An item not tested |Manual| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Centre Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Lower Front suspension assembly component cracked |2.3.1| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Brake lever mounting insecure |3.1.2a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Throttle operating incorrectly Does not shut the throttle when moved to the closed postion |6.2.1f| | 1 |
Offside Handlebar mounting clamp loose |2.1.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake pedal mounting insecure |3.1.2a| | 1 |
Brake locking device missing reaction arm bolt, safety pin missing |3.2.A1e| | 1 |
Front Direction indicator insecure |1.5.3b| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake component leaking fluid |3.2.B4| | 1 |
Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Outer Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Lower Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Offside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Offside Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Brake hose connection leaking |1.1.12 |c|| | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Forks insecure (2.2.2 (d) (i)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Rear Direction indicator adversely affected by the operation of another lamp Coming on with nearside indicators (4.4.3 (b)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Brake hose leaking (1.1.12 (c)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp adversely affected by the operation of another lamp Brake Light not working when Lights are turned on (4.3.3 (b)) | 1 |
Headlamp light intensity severely reduced Headlight Leds no not give out a beam (4.1.4 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Suspension arm corroded and seriously weakened swing arm (5.3.3 (b) (i)) | 1 |
Nearside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Front brake light switch defective (4.3.2 (a) (iii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Rear Lower Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |