| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 30 |
| Throttle operating incorrectly |6.2.1f| | 10 |
| Registration plate issues | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 6 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 3 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 3 |
| Rear Motorcycle structure excessively corroded |6.1.1a| | 3 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Brake excessively binding FRONT |1.2.1 |f|| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Horn not working |1.7.3a| | 2 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Nearside Rear reflector missing |1.5.1a| | 1 |
| Offside Rear reflector missing |1.5.1a| | 1 |
| Centre Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Offside Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Front Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Nearside Motorcycle structure adversely modified |6.1.1b| | 1 |
| Offside Rear Rear suspension component loose |2.4.A.1a| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Offside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Shock absorber has a serious fluid leak folk |5.3.2 |b|| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Rear Braking system leaking rear brake slave cylinder leaking |3.6.A.1| | 1 |
| Centre Rear Rear reflector missing |1.5.1a| | 1 |
| Offside Rear Stop lamp missing |1.3.3a| | 1 |
| Offside Rear Lower Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Lower Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Direction indicators not working rear n/s |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Nearside Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front front brake binding |3.7.B.1| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Brake lever has inadequate reserve travel |9.3.1f| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Horn not working |1.6.2a| | 1 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Rear Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
| Rear Suspension arm corroded and seriously weakened |5.3.3 |b| |i|| | 1 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Offside Indicator tell tale not functioning |1.5.2| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Centre Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Handlebar deformed bars bent |2.1.1b| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases Collector box (6.1.2 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Offside Front Shock absorber has a serious fluid leak FORK SEAL LEAKING (5.3.2 (b)) | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect NO FLAT BEAM OR CUTOFF (4.1.2 (c)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Front Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |