| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Registration plate issues | 9 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Rear parking brake recording little or no effort | 3 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Direction indicator insecure |1.5.3b| | 2 |
| Stop lamp not working |1.2.1b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear suspension component excessively corroded. |2.4.A.1a| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Stop lamp obviously incorrectly positioned |1.2.1a| | 1 |
| Front wheel bearings have excessive free play |9.2.8c| | 1 |
| Rear Drive shaft uj which forms part of the suspension has an inadequately locked flange bolt |2.4.G.4c| | 1 |
| Offside Rear Direction indicators not working |1.4.A.2c| | 1 |
| Centre Front suspension assembly has excessive free play in the pivot bushes |9.2.5d| | 1 |
| Nearside Obligatory mirror missing |8.1.1| | 1 |
| Offside Obligatory mirror missing |8.1.1| | 1 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Centre Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Front Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Brake hose has insufficient room to move | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |9.2.2a| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Rear Brake hose twisted |3.6.B.4c| | 1 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Stop lamp does not illuminate immediately a brake applies from rear brake |1.3.1a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Nearside Motorcycle structure excessively corroded Lower frame |6.1.1a| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Offside Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Brake lever insecure |3.1.2a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Front Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake component is fractured |3.1.5| | 1 |
| Nearside Steering lock stop ineffective |2.1.3| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Stop lamp|s| not working using front brake lever |4.3.1 |a| |ii|| | 1 |
| Rear Brake pipe connection leaking on a hydraulic braking system to flexy union |1.1.11 |b| |ii|| | 1 |
| Offside Rear Upper Footrest insecure mounting broken off. |6.2.12 |a|| | 1 |
| Vehicle structure strengthening plate or fastening insecure 2 engine mounting bolts insecure. |6.1.1 |b| |i|| | 1 |
| Front wheel spindle securing nut|s| loose |9.2.8a| | 1 |
| Handlebar mounting clamp loose |9.2.1c| | 1 |
| Rear Suspension arm attachment bracket/mounting insecure swinging arm locking nuts. |2.4.G.1| | 1 |
| Stop lamp not working using front brake lever. |1.2.1b| | 1 |
| Front position lamp|s| missing o/s and n/s |1.1.A.3a| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Front position lamp|s| missing |1.1.A.3a| | 1 |
| Nearside Rear Front position lamp|s| missing |1.1.A.3a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Offside Steering lock stop missing |2.1.3| | 1 |
| Front Horn sound not in accordance with requirements croaky (7.7 (c)) | 1 |
| Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Suspension component corroded and seriously weakened swing arm (5.3.3 (b) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Brake pipe excessively corroded | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Nearside Rear Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |