Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
Drive chain excessively loose |6.2.1d| | 15 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Registration plate issues | 6 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Rear Brake excessively binding |1.2.1 |f|| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear reflector on motorcycle obscured |1.4.1| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 2 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Brake pedal is inoperative |3.1.3c| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Roller brake test indicates a binding brake adjusted rear brake rod/nut |3.3.A1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Horn not working |1.7.3a| | 1 |
Brake lever is so short and the brake cannot be readily applied front |3.1.3c| | 1 |
Front shock absorber seal failed and leaking oil n/s |2.3.3| | 1 |
Front shock absorber seal failed and leaking oil o/s |2.3.3| | 1 |
Roller brake test indicates a binding brake rear |3.3.A1a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Rear reflector on motorcycle missing |1.4.1| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticks on and has to be shut off manually. |6.2.7 |a| |ii|| | 1 |
Throttle operating incorrectly not shutting off |6.2.1f| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Rear Rear reflector on sidecar missing |1.4.1| | 1 |
Rear Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake torque arm locking device missing |6.2.1h| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Roller brake test indicates a binding brake adjusted |3.3.A1a| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Brake component inadequately mounted FRONT BRAKE MASTER CYLINDER BOLT MISSING. |1.1.21 |c|| | 1 |
Steering headbearing excessively stiff or notchy NOTCHY. |2.2.2 |f| |i|| | 1 |
Exhaust system insecure |6.1.2 |a|| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Front Shock absorber has a serious fluid leak Fork seal |5.3.2 |b|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Brake component inadequately mounted FRONT BRAKE MASTER CYLINDER HAS ONE MOUNTING BOLT MISSING. (1.1.21 (c)) | 1 |
Throttle operating incorrectly NOT RETURNING. (6.2.7 (a) (i)) | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Throttle operating incorrectly Throttle jams when handlebars turned to offside. (6.2.7 (a) (i)) | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Exhaust has a major leak of exhaust gases Exhaust system rotten and detached from header fixing (6.1.2 (a)) | 1 |
Headlamp aim not tested not working (4.1.2 (b)) | 1 |
Footrest insecure left and right (6.2.12 (a)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Central Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Brake lever insecure lever /handle loose. (1.1.2 (e) (i)) | 1 |
Front Exhaust has a major leak of exhaust gases down pipe, blowing. (6.1.2 (a)) | 1 |
Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Stop lamp not working rear switch not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |