Most common failures | No# failures |
---|
Headlamp aim out of alignment | 56 |
Drive chain excessively loose |6.2.1d| | 25 |
Registration plate issues | 23 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 22 |
Rear reflector on motorcycle missing |1.4.1| | 22 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Rear reflector on motorcycle obscured |1.4.1| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Front Brake excessively binding (1.2.1 (f)) | 9 |
Drive chain worn to excess |6.2.1e| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Rear reflector missing (4.8.2 (a) (ii)) | 7 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 6 |
Horn not working |1.7.3a| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Registration plate lamp issues | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 4 |
Front Brake excessively binding |1.2.1 |f|| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Drive chain worn to excess (6.1.7 (c) (i)) | 4 |
Drive chain excessively loose (6.1.7 (c) (i)) | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Handlebar deformed |2.1.1b| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear reflector on motorcycle obscured |1.4.2b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Front Position lamp not working |4.2.1 |a|| | 2 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Hazard warning switch missing |1.4.B.1d| | 2 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies foot brake |1.3.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Brake component is excessively corroded |3.1.5| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Stop lamp does not illuminate immediately a brake applies stop lamp not working with front brake |1.3.1a| | 1 |
Brake locking device missing no split pin in rear brake arm |3.2.A1e| | 1 |
Brake locking device insecure rear brake arm fitted incorrectly
|3.2.A1e| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Stop lamp not working Front brake light switch inoperative. |4.3.1 |a| |ii|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Brake cylinder inadequately mounted and braking performance affected Front Brake master cylinder mounted at incorrect angle. |1.1.16 |c| |ii|| | 1 |
Central Riders seat insecure |6.2.1a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Fuel tank leaking |7.2.1a| | 1 |
Wheel bearing has excessive play front wheel |5.1.3 |a| |i|| | 1 |
Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies front |1.3.1a| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Offside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Stop lamp not working rear foot brake |4.3.1 |a| |ii|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Stop lamp remains on when the brake is released adjust stop switch |1.3.1e| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front Roller brake test indicates a severely grabbing brake front brake grabs and judders |3.3.A1b| | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen headlamp needs resetting |1.6.B.1| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Position lamp not working |4.2.1 |a|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake component insecure split pin missing |1.1.21 |c|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake component insecure |1.1.21 |c|| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride locking device missing from rear brake reactor rod |6.2.1h| | 1 |
Front shock absorber seal failed and leaking oil both |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies Rear Control |1.3.1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
Parking brake efficiency below requirements |3.7.B.7| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Suspension component corroded and seriously weakened swingarm holed |5.3.3 |b| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Front Direction indicators not working NEARSIDE FRONT WINKER LENS MISSING |1.5.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Nearside Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
Front Headlamp insecure |1.7.3| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Driver`s seat insecure |6.2.A.1| | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Roller brake test indicates a severely grabbing brake (3.3.A1b) | 1 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Motorcycle structure has excessive corrosion which adversely affects braking or steering rear hub stableising rod missing (6.1.1 (c) (ii)) | 1 |
Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
Roller brake test No brake control achieves an efficiency of 30% (1.2.2 (a) (i)) | 1 |
Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Rear reflector on motorcycle obscured (1.4.1) | 1 |
Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Stop lamp not working when rear brake is applied (4.3.1 (a) (ii)) | 1 |
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Rear All position lamps not working (4.2.1 (a)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle catching on clocks. incorrectly routed (6.2.7 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Rear Brake cable damaged cable presented with snaped cable (1.1.15 (a)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Rear Drive chain worn to excess Excessive tight spots (6.1.7 (c) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
Front Brake master cylinder leaking glass window leaking (1.1.10 (b) (ii)) | 1 |
Brake lever is bent and the brake cannot be readily applied lever broken too short for four fingers (1.1.2 (d)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Front stop switch defective. (4.3.2 (a) (iii)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Stop lamp not working Rear brake switch (4.3.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Upper Brake hose connection leaking (1.1.12 (c)) | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Steering operation restricted in free movement from lock to lock pinching front brake flexi-hose (2.1.4 (c)) | 1 |
Rear Brake component insecure reaction rod split pin missing (1.1.21 (c)) | 1 |
Throttle operating incorrectly sticking on right hand lock (6.2.7 (a) (i)) | 1 |
Rear Wheel spindle locking device ineffective (5.2.1 (d)) | 1 |
Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Brake performance not tested (1.2.1 (g)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak fork (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork (5.3.2 (b)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Handlebar grip missing (2.2.1 (d) (i)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |