Most common failures | No# failures |
---|
Headlamp aim out of alignment | 35 |
Drive chain excessively loose |6.2.1d| | 22 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Rear reflector on motorcycle missing |1.4.1| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear reflector on motorcycle obscured |1.4.1| | 9 |
Registration plate issues | 8 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 7 |
Drive chain worn to excess |6.2.1e| | 6 |
Riders seat insecure |6.2.1a| | 5 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Direction indicators not working |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Brake disc contaminated |1.1.14 |b|| | 2 |
Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Horn not working |7.7 |a| |ii|| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp does not illuminate immediately a brake applies front control |1.3.1a| | 1 |
Nearside Front Footrest missing |6.2.1a| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Handlebar handgrip not secure to handlebars. l/h |2.1.1c| | 1 |
Roller brake test indicates a binding brake front |3.3.A1a| | 1 |
Roller brake test indicates a binding brake rear |3.3.A1a| | 1 |
Roller brake test indicates excessive fluctuation of brake effort front |3.3.A1d| | 1 |
Wheel alignment incorrect which adversely affects the steering steering twisted |2.5.1| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake component insecure |1.1.21 |c|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride n/s+o/s chain locking block nuts loose |6.2.1h| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Brake lagging in operation |1.2.1 |d|| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Brake hose connection leaking MASTER CYLINDER GLASS CRACKED |1.1.12 |c|| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected INSECURE |6.2.7 |a| |ii|| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Horn not working |1.7.3a| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Registration plate lamp issues | 1 |
Rear All direction indicators obviously incorrectly positioned |4.4.3 |a|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake hose excessively twisted |1.1.12 |b| |ii|| | 1 |
Headlamp incorrect colour |4.1.4 |a|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected head bearings notchy to excess |2.2.2 |f| |ii|| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a| | 1 |
Drive chain sprocket carrier worn to excess bearing excess play |6.2.1e| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain link |6.2.1h| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake lever is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brake is released ON REAR BRAKE APPLICATION |1.3.1e| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake linkage has restricted free movement not returning/seized (1.1.15 (e)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear reflector missing Obscured by L plate. (4.8.2 (a) (ii)) | 1 |
Central Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Rear reflector missing rear reflector covered by learner plate (4.8.2 (a) (ii)) | 1 |