Most common failures | No# failures |
---|
Headlamp aim out of alignment | 117 |
Rear reflector on motorcycle missing |1.4.1| | 72 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 58 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 37 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 35 |
Registration plate issues | 33 |
Throttle operating incorrectly |6.2.1f| | 32 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 32 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 30 |
Drive chain excessively loose |6.2.1d| | 30 |
Horn not working |1.7.3a| | 30 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 22 |
Front wheel bearings have excessive free play |2.3.5b| | 22 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 21 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 20 |
Exhaust is leaking and excessively noisey |7.1.1b| | 18 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 18 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 18 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 18 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 17 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 16 |
Rear Rear reflector on motorcycle missing |1.4.1| | 15 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 15 |
Front wheel bearings are excessively rough |2.3.5b| | 15 |
Steering headbearing has excessive free play |2.2.2| | 14 |
Drive chain excessively tight |6.2.1d| | 13 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Drive chain worn to excess |6.2.1e| | 11 |
Headlamp aim beam image kick up to the offside |1.6| | 11 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 10 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 9 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 9 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 9 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 9 |
Front Brake excessively binding (1.2.1 (f)) | 9 |
Front Front wheel bearings are excessively rough |2.3.5b| | 8 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 8 |
Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Front Front wheel bearings have excessive free play |2.3.5b| | 6 |
Rear Brake disc|s| cracked |3.2.A1g| | 6 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear reflector missing |4.8.2 |a| |ii|| | 6 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 5 |
Offside Rear Direction indicators not working |1.5.1c| | 5 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 5 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 5 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Front Throttle operating incorrectly |6.2.1f| | 5 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 5 |
Rear Drive chain excessively loose |6.2.1d| | 5 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 5 |
Exhaust excessively deteriorated |7.1.1a| | 5 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 4 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 4 |
Nearside Front Direction indicator insecure |1.5.3b| | 4 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 4 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 4 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Horn not working |1.7.3a| | 4 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |