Most common failures | No# failures |
---|
Headlamp aim out of alignment | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Registration plate issues | 8 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Front wheel bearings are excessively rough |2.3.5b| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Centre Exhaust excessively deteriorated |7.1.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Stop lamp remains on when the brake is released switch staying on |1.3.1e| | 1 |
Offside Rear Brake reaction bracket securing bolt|s| missing spint pin |3.2.A1j| | 1 |
Front Brake pipe inadequately supported |3.2.B2b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Brake component insecure Brake hose insecure! |1.1.21 |c|| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Front Brake lever mounting insecure |3.1.2a| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Offside Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Brake hose fouling |3.2.B3b| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Nearside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Nearside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Motorcycle structure excessively corroded rear subframe |6.1.1a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Horn not working |1.7.3a| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Central Rear Wheel more than one fixing loose ALL 4 wheel nuts loose (5.2.1 (a) (ii)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Central Front Fork yoke insecure (2.2.2 (d) (i)) | 1 |
Offside Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Front shock absorber seal failed and leaking oil (2.3.3) | 1 |
Front wheel bearings are excessively rough (2.3.5b) | 1 |
Front wheel bearings have excessive free play (2.3.5b) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Offside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Nearside Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
Rear Stop lamp not working switch (4.3.1 (a) (ii)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp when brake applied (4.2.3 (b)) | 1 |
Fuel cap ineffective no key available (6.1.3 (b) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Offside Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Central Front Lower Valve stem seriously damaged (5.2.3 (j)) | 1 |
Central Rear Upper Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Central Front Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |