Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp aim out of alignment | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Throttle operating incorrectly |6.2.1f| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Registration plate issues | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Horn not working |1.7.3a| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock |2.1.4 |a|| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
An item not tested |Manual| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Front Horn not working |1.7.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Footrest missing R/H |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front wheel spindle loose |2.3.5a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |