Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Headlamp aim beam image kick up to the offside |1.6| | 13 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Front Brake excessively binding (1.2.1 (f)) | 3 |
Drive chain excessively loose |6.2.1d| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Indicator tell tale not operating correctly |1.5.2| | 2 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Registration plate issues | 1 |
Nearside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Offside Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Offside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Nearside Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Front Wheel more than one fixing loose |5.2.1 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Offside Upper Fork yoke insecure bolt loose |2.2.2 |d| |i|| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Centre Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Drive chain excessively tight |6.2.1d| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Brake locking device insecure |3.2.A1e| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp aim not tested |1.6| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Centre Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Stop lamp with a multiple light source more than 1/2 not functioning |4.3.1 |a| |ii|| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Steering lock stop ineffective |2.1.3| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Front Upper Headlamp aim beam image too far to the right |1.6.4| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Footrest missing |6.2.1a| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Horn not working |1.7.3a| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Exhaust markings indicating not for road use or similar wording |6.1.2 |c|| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Rear Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Offside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |