Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Rear reflector on motorcycle missing |1.4.1| | 19 |
Registration plate issues | 12 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Steering headbearing has excessive free play |2.2.2| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Throttle operating incorrectly |6.2.1f| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Horn not working |1.7.3a| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Steering headbearing has excessive free play |2.2.2| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear Brake disc|s| cracked |3.2.A1g| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Brake hose damaged | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Fairings so located that it is likely to impede the steering |2.1.2e| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Rear reflector on motorcycle missing (1.4.1) | 2 |
Front wheel bearings are excessively rough (2.3.5b) | 2 |
Offside Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k) | 2 |
Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Motorcycle structure joining/attachment plate or fastening insecure Rear brake master cylinder push rod missing retaining split pin |6.1.1 |b| |i|| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Upper Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Offside Front Lower Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Centre Rear Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain excessively tight |6.2.1d| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Front Brake lever attachment screws missing |3.1.2b| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Nearside Rear Lower Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Rear Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Nearside Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Nearside Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Steering control handlebar movement restricted by trapped cables Clutch cable fouling |2.1.2c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Front Upper Brake lever attachment screws loose |3.1.2b| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Offside Front Upper Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Front Upper Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Centre Front Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Centre Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Fork yoke deformed |2.1.1b| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Nearside Upper Front suspension assembly component loose |2.3.1| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Motorcycle structure cracked |6.1.1a| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Brake fluid contaminated |1.8 |a|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Rear shock absorber has inadequate damping effect. (2.4.A.3b) | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Brake lever insecure Clamp loose (1.1.2 (e) (i)) | 1 |
Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Steering movement excessively notchy with the wheel raised (2.2.1b) | 1 |
Fairings insecure and likely to impede the steering (2.1.2e) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Brake pedal attachment screws loose (3.1.2b) | 1 |
Brake pedal mounting insecure (3.1.2a) | 1 |
Front wheel bearings have excessive free play (2.3.5b) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake cylinder leaking (1.1.16 (b) (i)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |