| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
| Registration plate issues | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Riders seat insecure |6.2.1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front Footrest insecure |6.2.1a| | 2 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Upper Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Brake pedal cracked |3.1.2c| | 1 |
| Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Centre Front Riders seat insecure |6.2.1a| | 1 |
| Centre Rear Upper Motorcycle structure cracked |6.1.1a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Brake performance not tested |3.3| | 1 |
| Front Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Nearside Brake caliper|s| insecure |3.2.A1j| | 1 |
| Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Footrest insecure |6.2.1a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Front Horn not working |1.7.3a| | 1 |
| Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Stop lamp not working Rear control. |4.3.1 |a| |ii|| | 1 |
| Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Fork yoke deformed |2.1.1b| | 1 |
| Rear Upper Exhaust mounting missing |7.1.1c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Offside Front Upper Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Offside Front Upper Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Upper Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Centre Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Inner Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Steering operation restricted in free movement from lock to lock Throttle cables pulled taut (2.1.4 (c)) | 1 |
| Rear All direction indicators obviously incorrectly positioned Mandatory direction indicators must have minimum separation distances between the illuminating surfaces of 180mm at the rear (4.4.3 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |