>

MOT History from tests of petrol HONDA VF1000Fs year 1986

Review the list of common HONDA VF1000F failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:81.95%
(The average a petrol HONDA VF1000F year 1986 passes without issue)
Based on:626 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment13
Rear reflector on motorcycle missing |1.4.1|12
Registration plate issues9
Front position lamp does not illuminate immediately when switched on |1.1.3a|8
Offside Front shock absorber seal failed and leaking oil |2.3.3|6
Nearside Front shock absorber seal failed and leaking oil |2.3.3|5
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|5
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|4
Steering headbearing has excessive free play |2.2.2|4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|3
Front Roller brake test indicates a binding brake |3.3.A1a|3
Nearside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|2
Rear Rear wheel bearings have excessive free play |2.4.A.2c|2
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Exhaust is leaking and excessively noisey |7.1.1b|2
Front shock absorber seal failed and leaking oil |2.3.3|2
Exhaust is leaking and excessively noisey |7.1.1b|2
Centre Exhaust is leaking and excessively noisey |7.1.1b|2
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Offside Steering lock stop ineffective |2.1.3|2
Rear Roller brake test indicates a binding brake |3.3.A1a|2
Horn not working |1.7.3a|2
Rear Drive chain fouling another component |6.2.1d|2
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Front wheel bearings are excessively rough |2.3.5b|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b|1
Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Offside Front Direction indicators not working |1.5.1c|1
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Nearside Fairing so located that it is likely to impede the steering |2.1.2e|1
Offside Fairing insecure and likely to impede the steering |2.1.2e|1
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j|1
Headlamp deteriorated and function impaired |1.2.3a|1
Direction indicator missing |1.5.1a|1
Rear Floor brake test indicates a sticking brake |3.3.C2c|1
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Headlamp aim not tested |1.6|1
Upper Steering headbearing has excessive free play |2.2.2|1
Front Steering headbearing has excessive free play |2.2.2|1
Rear Rear reflector missing |4.8.2 |a| |ii||1
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Front Hydraulic brake control feels spongy |3.1.4a|1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Brake lever has inadequate reserve travel |3.1.3b|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|1
Drive chain fouling another component |6.2.1d|1
Front position lamp missing |1.1.1a|1
Brake hose excessively deteriorated1
Rear Fairings insecure and likely to impede the steering |2.1.2e|1
Rear Rear mono-shock pivot excessively worn |2.4.B.4|1
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|1
Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j|1
Drive chain excessively tight |6.2.1d|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Throttle operating incorrectly |6.2.1f|1
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii||1
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3|1
Upper Rear mono-shock pivot excessively worn |2.4.B.4|1
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Drive chain sprocket worn to excess |6.2.1e|1
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Exhaust excessively deteriorated |7.1.1a|1
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii||1
Drive chain excessively loose |6.2.1d|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Headlamp insecure |1.2.3b|1
Front wheel bearings have excessive free play |2.3.5b|1
Rear suspension bearing has excessive free play |2.4.A2a|i||1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake performance not tested |3.3|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Rear Suspension arm pin or bush excessively worn swinging arm (5.3.4 (a) (i))1
Drive chain excessively loose (6.1.7 (c) (i))1
Horn not working (7.7 (a) (ii))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Brake lever has insufficient reserve travel (1.1.2 (a))1
Front Stop lamp does not illuminate by the operation of both brake controls Front stop light switch not working (4.3.2 (a) (iii))1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy