| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Registration plate issues | 5 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Registration plate lamp issues | 2 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen no pattern |1.6.B.1| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Upper Motorcycle structure cracked |6.1.1a| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Nearside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |