| Most common failures | No# failures |
|---|
| Registration plate issues | 9 |
| Headlamp aim out of alignment | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Offside Rear Footrest missing |6.2.12 |a|| | 1 |
| Front Stop lamp not working front switch |4.3.1 |a| |ii|| | 1 |
| Wheel fixing missing |single fixing| split pin missing |5.2.1 |a| |ii|| | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Offside Front Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Wheel fixing loose (single fixing) rear wheel adjuster (5.2.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect kick up is wrong way-left hand drive lamps. (4.1.2 (c)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Front Coil spring fractured or broken both front coil springs are broken. (5.3.1 (b) (i)) | 1 |
| Rear Service brake effort inadequate at a wheel poor effort both sides (1.2.1 (a) (i)) | 1 |
| Parking brake inoperative on one side both sides poor effort possibly callipers ? (1.4.1 (a)) | 1 |
| Nearside Front Service brake excessively binding wheelbearing not tested. (1.2.1 (f)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Nearside Fuel pipe insecure (6.1.3 (a) (i)) | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Offside Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
| Gradient brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Throttle operating incorrectly sticky and grip loose (6.2.7 (a) (i)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls Front Brake lever not working (4.3.2 (a) (iii)) | 1 |
| Headlamp aim projected beam image obviously incorrect kick up to offside (4.1.2 (c)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |