| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Headlamp aim out of alignment | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies brake switch faulty |1.3.1a| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Brake locking device missing Torque arm securing clip. |3.2.A1e| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Brake pipe inadequately supported |3.2.B2b| | 1 |
| Direction indicators affected by the operation of another lamp both front indicators remain on. |1.5.1c| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Front Brake pipe at imminent risk of failure or fracture all front alloy ends on all front pipes |1.1.11 |a|| | 1 |
| Rear Brake pipe at imminent risk of failure or fracture alloy ends |1.1.11 |a|| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Rear suspension component loose |2.4.A.1a| | 1 |
| Offside Rear suspension component loose |2.4.A.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Position lamp missing |4.2.1 |a|| | 1 |
| Nearside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Rear Brake fluid contaminated |1.8 |a|| | 1 |
| Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
| Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Stop lamp not working with front brake (4.3.1 (a) (ii)) | 1 |
| Headlamp light source and lamp not compatible full beam light on all time (4.1.4 (c)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp not working when footbrake applied (4.3.1 (a) (ii)) | 1 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| All direction indicators light intensity significantly reduced when switch off carries on flashing dimly (4.4.3 (a)) | 1 |
| Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Registration plate issues | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Rear Service brake excessively binding when reversing (1.2.1 (f)) | 1 |
| Steering head bearings has excessive wear or free play (2.2.2 (g)) | 1 |
| Stop lamp(s) not working from front brake control (4.3.1 (a) (ii)) | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Front Stop lamp missing front brake light switch missing (4.3.1 (a) (ii)) | 1 |
| Nearside Front Brake caliper leaking and braking performance affected front caliper leaking at banjo bolt/hose connection (1.1.16 (b) (ii)) | 1 |
| Offside Front Brake caliper leaking and braking performance affected front caliper leaking at banjo bolt/hose connection (1.1.16 (b) (ii)) | 1 |
| Handlebar mounting insecure handlebars loose at clamp/moving (2.2.1 (a) (i)) | 1 |
| Rear Brake excessively binding rear brakes sticks on after being applied (1.2.1 (f)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Suspension arm ball joint excessively worn Swingarm bush worn play (5.3.4 (a) (i)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Nearside Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |