| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 22 |
| Registration plate issues | 7 |
| Horn not working |1.7.3a| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Front Brake excessively binding |1.2.1 |f|| | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Fuel system component leaking (6.1.3 (b) (i)) | 2 |
| Horn not working (7.7 (a)) | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Rear Brake pedal insecure (1.1.2 (e) (i)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| All position lamps do not illuminate immediately when switched on all lights |1.1.3a| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride split pin missing etc |6.2.1h| | 1 |
| Rear Brake locking device missing missing |3.2.A1e| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Direction indicators not working intermitant |1.5.1c| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment potential to lock on |3.2.A1i| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear position lamp insecure lense |1.1.1c| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Offside Fuel system component leaking carb |7.2.1a| | 1 |
| Throttle operating incorrectly sticking |6.2.1f| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Nearside Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Stop lamp remains on when the brake is released rear stop light |1.3.1e| | 1 |
| Direction indicator deteriorated and function impaired indicaters do not turn off between flashes |1.5.3a| | 1 |
| Fuel system component leaking fuel leaking from carbs |7.2.1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering adjustment to left required |2.5.1| | 1 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Nearside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen due to dip beam not working |4.1.2 |a|| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Rear Brake linkage has restricted free movement brake drum lever pivot |1.1.15 |e|| | 1 |
| Offside Footrest insecure |6.2.12 |a|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
| Fuel pipe leaking at carb |6.1.3 |b| |i|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure rear brake rod insecure (6.1.1 (b) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Riders seat insecure (6.2.5 (a) (ii)) | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Suspension arm insecurely attached (5.3.3 (a) (i)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| Suspension arm corroded and seriously weakened trailing arm (5.3.3 (b) (i)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake cable guide defective and affecting operation (1.1.15 (d)) | 1 |
| Steering linkage locking device missing (2.1.3 (d)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Offside Direction indicator not working front and rear (4.4.1 (a) (ii)) | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Brake rod insecure (1.1.15 (c)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |