MOT History from tests of petrol HONDA TL125s year 1976

Review the list of common HONDA TL125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:79.67%

(The average a petrol HONDA TL125 year 1976 passes without issue)

Based on:123 MOT Tests

Most common failures	No# failures
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	3
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front wheel spindle securing nut locking device missing \|2.3.5a\|	2
Rear Wheel spoke excessively loose \|4.2.1b\|	2
Registration plate issues	2
Throttle operating incorrectly \|6.2.1f\|	2
Horn not working \|1.7.3a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Front suspension assembly component loose \|2.3.1\|	1
Front Horn is not a constant note \|1.7.3c\|	1
Rear Brake reaction bracket insecure \|3.2.A1j\|	1
Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Brake lever pivot has excessive free play \|1.1.1 \|b\|\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Inner Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Brake back plate\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Horn is not a constant note \|1.7.3c\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Horn missing \|1.7.1\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front Brake cable excessively corroded \|3.2.A1b\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Horn missing \|1.7.1\|	1
Rear Brake locking device insecure \|3.2.A1e\|	1
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear wheel spindle securing nut locking device missing \|2.4.A.2b\|	3
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front wheel spindle securing nut locking device missing \|2.3.5a\|	2
Rear Wheel spoke excessively loose \|4.2.1b\|	2
Registration plate issues	2
Throttle operating incorrectly \|6.2.1f\|	2
Horn not working \|1.7.3a\|	2
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Front suspension assembly component loose \|2.3.1\|	1
Front Horn is not a constant note \|1.7.3c\|	1
Rear Brake reaction bracket insecure \|3.2.A1j\|	1
Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Front Brake lever pivot has excessive free play \|1.1.1 \|b\|\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Inner Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Rear Brake back plate\|s\| securing bolt\|s\| missing \|3.2.A1j\|	1
Front wheel bearings have excessive free play \|2.3.5b\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Direction indicators affected by the operation of another lamp \|1.5.1c\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Offside Direction indicator flashing less than 60 times a minute \|1.5.1c\|	1
Nearside Front Direction indicator not working \|1.5.1c\|	1
Horn is not a constant note \|1.7.3c\|	1
Horn is not continous or uniform \|1.7.3c\|	1
Horn missing \|1.7.1\|	1
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Front Brake cable excessively corroded \|3.2.A1b\|	1
Rear Rear reflector on motorcycle missing \|1.4.1\|	1
Front Horn missing \|1.7.1\|	1
Rear Brake locking device insecure \|3.2.A1e\|	1
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock \|2.1.4\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1

MOT History from tests of petrol HONDA TL125s year 1976

Find us on Facebook