MOT History from tests of petrol HONDA SUPERs year 1982

Review the list of common HONDA SUPER failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:72.06%

(The average a petrol HONDA SUPER year 1982 passes without issue)

Based on:68 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	6
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. \|2.4.A.2d\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Stop lamp remains on when the brake is released front lever \|1.3.1e\|	1
Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Drive chain excessively loose \|6.2.1d\|	1
Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Fuel system component leaking \|7.2.1a\|	1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Offside Rear Footrest insecure \|6.2.1a\|	1
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Direction indicator insecure \|1.5.3b\|	1
Front Upper Brake fluid reservoir leaking hydraulic fluid \|3.2.B1e\|	1
Nearside Front Brake caliper\|s\| insecure \|3.2.A1j\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	6
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	3
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Front suspension has excessive stiffness in the suspension movement. \|2.3.6b\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. \|2.4.A.2d\|	1
Nearside Rear Footrest insecure \|6.2.1a\|	1
Front Brake lever is damaged and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake pedal is bent and the brake cannot be readily applied \|3.1.3c\|	1
Front wheel bearings are excessively rough \|2.3.5b\|	1
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Stop lamp remains on when the brake is released front lever \|1.3.1e\|	1
Front wheel spindle securing nut locking device missing \|2.3.3a\|	1
Stop lamp remains on when the brake is released \|1.3.1e\|	1
Drive chain excessively loose \|6.2.1d\|	1
Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Fuel system component leaking \|7.2.1a\|	1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Nearside Rear Direction indicator not working \|1.5.1c\|	1
Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front suspension has inadequate damping effect. \|2.3.6c\|	1
Offside Rear Footrest insecure \|6.2.1a\|	1
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	1
Rear Direction indicator insecure \|1.5.3b\|	1
Front Upper Brake fluid reservoir leaking hydraulic fluid \|3.2.B1e\|	1
Nearside Front Brake caliper\|s\| insecure \|3.2.A1j\|	1

MOT History from tests of petrol HONDA SUPERs year 1982

Find us on Facebook