Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear suspension component excessively corroded. |2.4.A.1a| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front wheel bearings have excessive free play |2.3.5b| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Registration plate issues | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Brake component is excessively corroded |3.1.5| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Offside Front Brake component is severely distorted |3.1.5| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Horn not working |1.7.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Stop lamp does not illuminate immediately a brake applies | Front brake switch | |1.3.1a| | 1 |
Rear Rear position lamp insecure |1.1.1c| | 1 |
Nearside Front Brake component is severely distorted |3.1.5| | 1 |
Nearside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Throttle operating incorrectly sticking on left lock
|6.2.1f| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Brake disc|s| securing bolt|s| loose Rear |3.2.A1g| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Motorcycle structure excessively corroded swingarm |6.1.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Wheel fractured |5.2.2 |a|| | 1 |
Rear Wheel fractured |5.2.2 |a|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Stop lamp not working from hand lever |4.3.1 |a| |ii|| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |