>

MOT History from tests of petrol HONDA ST1100Ls year 1991

Review the list of common HONDA ST1100L failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:82.82%
(The average a petrol HONDA ST1100L year 1991 passes without issue)
Based on:1,071 MOT Tests
Most common failuresNo# failures
Front Roller brake test indicates a binding brake |3.3.A1a|21
Headlamp aim out of alignment17
Rear Roller brake test indicates a binding brake |3.3.A1a|17
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|11
Rear suspension component excessively corroded. |2.4.A.1a|7
Nearside Front shock absorber seal failed and leaking oil |2.3.3|7
Exhaust is leaking and excessively noisey |7.1.1b|7
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Front wheel bearings have excessive free play |2.3.5b|7
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Throttle operating incorrectly |6.2.1f|5
Rear Brake disc|s| cracked |3.2.A1g|5
Steering headbearing has excessive free play |2.2.2|4
Nearside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Rear shock absorber has inadequate damping effect. |2.4.A.3b|4
Steering movement excessively `notchy` with the wheel raised |2.2.1b|4
Rear Brake disc|s| excessively worn |3.2.A1l|4
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|4
Front Floor brake test indicates a binding brake |3.3.C2c|4
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|4
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear Roller brake test indicates a sticking brake |3.3.A1a|3
Front position lamp does not illuminate immediately when switched on |1.1.3a|3
Rear Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d|3
Rear Floor brake test indicates a sticking brake |3.3.C2c|3
Front Front wheel bearings have excessive free play |2.3.5b|3
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|3
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Front Brake lever has inadequate reserve travel |3.1.3b|3
Stop lamp remains on when the brake is released |1.3.1e|2
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|2
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|2
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))2
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Rear wheel bearings have excessive free play |2.4.A.2c|2
Nearside Exhaust excessively deteriorated |7.1.1a|2
Nearside Rear suspension component excessively corroded. |2.4.A.1a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|2
Rear Motorcycle structure excessively corroded |6.1.1a|2
Front Front shock absorber seal failed and leaking oil |2.3.3|2
Front Brake excessively binding |1.2.1 |f||2
Front Stop lamp not working (4.3.1 (a) (ii))2
Headlamp switch faulty |1.2.4|2
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|2
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|2
Stop lamp does not illuminate immediately a brake applies on front brake lever doesn`t light |1.3.1a|1
Stop lamp not working on brake lever (4.3.1 (a) (ii))1
Central Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Offside Front Direction indicator not working |1.5.1c|1
Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a))1
Front suspension assembly component loose |2.3.1|1
Offside Exhaust is leaking and excessively noisey |7.1.1b|1
Fuel cap does not fasten securely by a positive means |7.2.2b|1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear swingarm crossmember (6.1.1 (c) (i))1
Front wheel bearings are excessively rough |2.3.5b|1
Brake pedal insecure |1.1.2 |e| |i||1
Offside Front Footrest insecure |6.2.12 |a||1
Offside Rear Footrest insecure |6.2.12 |a||1
Offside Exhaust system insecure |6.1.2 |a||1
Nearside Exhaust system insecure |6.1.2 |a||1
Front Direction indicator obscured |1.5.1a|1
Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Nearside Front Direction indicators not working |1.5.1c|1
Centre Rear Lower Rear suspension component excessively corroded. |2.4.A.1a|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake excessively binding (1.2.1 (f))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Nearside Exhaust silencer insecure (8.1.1 (b) (i))1
Offside Exhaust silencer insecure (8.1.1 (b) (i))1
Steering control handlebar movement restricted by taut cables |2.1.2c|1
Offside Front Footrest insecure |6.2.1a|1
Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Offside Front Headlamp switch faulty |1.2.4|1
Nearside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Exhaust excessively deteriorated |7.1.1a|1
Rear Lower Motorcycle structure excessively corroded |6.1.1a|1
Rear Rear reflector on sidecar missing |1.4.1|1
Front Brake disc|s| cracked |3.2.A1g|1
Motorcycle structure excessively corroded |6.1.1a|1
Horn not working (7.7 (a) (ii))1
Nearside Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Nearside Front Brake disc|s| cracked |3.2.A1g|1
Offside Front Brake disc|s| cracked |3.2.A1g|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Offside Exhaust excessively deteriorated |7.1.1a|1
Rear Lower Rear suspension component excessively corroded. |2.4.A.1a|1
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Offside Front Brake disc fractured (1.1.14 (a) (ii))1
Rear Wheel bearing rough when rotated (5.1.3 (b) (i))1
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||1
Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Centre Exhaust is leaking and excessively noisey |7.1.1b|1
Front Brake component damaged and seriously reduced in strength |3.2.A1|1
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i||1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake hose leaking fluid |3.2.B4|1
Rear reflector on motorcycle missing |1.4.1|1
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Front Stop lamp not working |4.3.1 |a| |ii||1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Headlamp aim not tested (4.1.2 (b))1
Centre Rear Roller brake test indicates a binding brake |3.3.A1a|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Stop lamp not working front brake not working light (4.3.1 (a) (ii))1
Horn not working |1.7.3a|1
Brake pedal has insufficient reserve movement |3.3.A.5|1
Offside Rear position lamp|s| not working |1.1.A.3b|1
Rear Brake pedal has insufficient reserve movement |3.3.A.5|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Offside Front Direction indicators not working |1.5.1c|1
Lower Rear shock absorber insecurely mounted |2.4.A.3b|1
Registration plate issues1
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|1
Rear Brake disc|s| has excessive run out |3.2.A1m|1
Stop lamp not working from front (4.3.1 (a) (ii))1
Offside Front Brake hose which buldges |3.2.B4|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Offside Rear Footrest insecure |6.2.1a|1
Stop lamp not working (4.3.1 (a) (ii))1
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m|1
Headlamp aim beam image kick up to the offside |1.6|1
Rear Lower Motorcycle structure excessively corroded swinging arm |6.1.1a|1
Front Wheel has an excessively distorted bead rim. |4.2.2|1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Nearside Rear Brake disc fractured |1.1.14 |a| |ii||1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy