Most common failures | No# failures |
---|
Headlamp aim out of alignment | 78 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 47 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 38 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 35 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 21 |
Exhaust is leaking and excessively noisey |7.1.1b| | 21 |
Headlamp aim beam image kick up to the offside |1.6| | 14 |
Front Brake excessively binding (1.2.1 (f)) | 13 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 12 |
Throttle operating incorrectly |6.2.1f| | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Exhaust excessively deteriorated |7.1.1a| | 9 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 8 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Rear Brake excessively binding (1.2.1 (f)) | 8 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
Front Front wheel bearings have excessive free play |2.3.5b| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 6 |
Registration plate issues | 6 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 6 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 6 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 5 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 5 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 5 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 5 |
Front Brake excessively binding |1.2.1 |f|| | 4 |
Rear Brake excessively binding |1.2.1 |f|| | 4 |
Centre Exhaust excessively deteriorated |7.1.1a| | 4 |
Rear Brake disc|s| cracked |3.2.A1g| | 4 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 4 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Front Throttle operating incorrectly |6.2.1f| | 4 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Front position lamp incorrect colour |1.1.2a| | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Headlamp switch faulty |1.2.4| | 4 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear suspension component excessively corroded. |2.4.A.1a| | 3 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
All direction indicators not working (4.4.1 (a) (ii)) | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Rear Brake disc fractured (1.1.14 (a) (ii)) | 2 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator not working |1.5.1c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Stop lamp does not emit a steady light |1.3.1b| | 2 |
Rear Brake disc fractured |1.1.14 |a| |ii|| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front Brake disc|s| cracked |3.2.A1g| | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Rear Suspension arm corroded and seriously weakened (5.3.3 (b) (i)) | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Offside Direction indicators not working |1.5.1c| | 2 |
An item not tested |Manual| | 2 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 2 |
Front Brake grabbing severely (1.2.1 (c)) | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Offside Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 2 |
Brake performance not tested (1.2.1 (g)) | 2 |
Front suspension assembly component loose |2.3.1| | 2 |