Most common failures | No# failures |
---|
Registration plate issues | 7 |
Headlamp aim out of alignment | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Direction indicators not working |1.5.1c| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Front Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Front Horn not working |1.7.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Direction indicators not working |1.5.1c| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Brake lever has inadequate reserve travel rear lever |3.1.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake cable excessively corroded |3.2.A1b| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Direction indicator not working Offside and Nearside |1.5.1c| | 1 |
Rear Direction indicator not working Offside and Nearside |1.5.1c| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Gradient brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.D1b| | 1 |
Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2| | 1 |
Centre Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Offside Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Rear Upper Fuel system component leaking |7.2.1a| | 1 |
Nearside Rear Upper Fuel pipe union leaking |7.2.1a| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Front Horn not working |1.7.3a| | 1 |
Nearside Front Upper Indicator switch insecure |1.5.4| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering lock stop maladjusted |2.1.3| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Brake performance not tested |3.3| | 1 |
Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |