MOT History from tests of petrol HONDA SH300s year 2009

Review the list of common HONDA SH300 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:93.62%

(The average a petrol HONDA SH300 year 2009 passes without issue)

Based on:486 MOT Tests

Most common failures	No# failures
Horn not working \|1.7.3a\|	2
Headlamp aim out of alignment	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Registration plate issues	2
Front Brake disc(s) cracked (3.2.A1g)	1
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Nearside Direction indicator not working \|1.5.1c\|	1
Front Brake excessively binding \|1.2.1 \|f\|\|	1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Registration plate lamp issues	1
Headlamp aim so that beam "kick up" is not visible on the screen \|1.6.B.1\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Upper Stop lamp does not illuminate by the operation of both brake controls stop lamp does not illuminate when rear brake lever is used (4.3.2 (a) (iii))	1
Stop lamp not working (4.3.1 (a) (ii))	1
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Nearside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Stop lamp remains on when the brakes are released	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Nearside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Horn not working \|1.7.3a\|	2
Headlamp aim out of alignment	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Registration plate issues	2
Front Brake disc(s) cracked (3.2.A1g)	1
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Front Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Rear Wheel has an excessively distorted bead rim. \|4.2.2\|	1
Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Nearside Direction indicator not working \|1.5.1c\|	1
Front Brake excessively binding \|1.2.1 \|f\|\|	1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))	1
Registration plate lamp issues	1
Headlamp aim so that beam "kick up" is not visible on the screen \|1.6.B.1\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Rear Upper Stop lamp does not illuminate by the operation of both brake controls stop lamp does not illuminate when rear brake lever is used (4.3.2 (a) (iii))	1
Stop lamp not working (4.3.1 (a) (ii))	1
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	1
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	1
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Nearside Rear Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	1
Stop lamp remains on when the brakes are released	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Nearside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Front Brake lever has inadequate reserve travel \|3.1.3b\|	1

MOT History from tests of petrol HONDA SH300s year 2009

Find us on Facebook