Most common failures | No# failures |
---|
Headlamp aim out of alignment | 33 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 14 |
Registration plate issues | 13 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear reflector on motorcycle obscured |1.4.1| | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 8 |
Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Headlamp insecure |1.2.3b| | 4 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
Front Brake disc|s| excessively worn |3.2.A1l| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
Stop lamp remains on when the brakes are released | 3 |
Headlamp insecure (4.1.1 (c)) | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 2 |
Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Horn not working |1.7.3a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Nearside Front Brake lever insecure |3.1.2a| | 1 |
Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake lever cracked |3.1.2c| | 1 |
Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Brake caliper excessively corroded and likely to crack suspect cracked (1.1.16 (d) (ii)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Brake excessively binding |1.2.1 |f|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake lever has insufficient reserve travel rear brake lever (1.1.2 (a)) | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear shock absorber has inadequate damping effect. no damping |2.4.A.3b| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Brake lever excessively corroded |3.2.A1c| | 1 |
Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking Rear Mudguard |6.1.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Rear Brake lever mounting insecure |3.1.2a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Centre Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Brake performance not tested front brake caliper insecure to n/s fork |1.2.1 |g|| | 1 |
Front Brake pipe leaking |1.1.11 |b|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Rear Brake fluid contaminated (1.8 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Nearside Brake lever has insufficient reserve travel Rear brake lever (1.1.2 (a)) | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Horn control defective |1.7.2a| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Nearside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Outer Front Lower Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Decelerometer brake test no brake control achieves an efficiency of 30% |3.3.E1a| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Valve stem seriously damaged Perished |5.2.3 |j|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front position lamp insecure screws missing |1.1.1c| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |