| Most common failures | No# failures |
|---|
| Registration plate lamp issues | 96 |
| Headlamp aim out of alignment | 76 |
| Stop lamp not working (4.3.1 (a) (ii)) | 38 |
| Stop lamp remains on when the brakes are released | 34 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 34 |
| Stop lamp not working |4.3.1 |a| |ii|| | 12 |
| Registration plate issues | 11 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 11 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 9 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 8 |
| Front Position lamp not working (4.2.1 (a)) | 8 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 7 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 7 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 7 |
| Riders seat insecure (6.2.5 (a) (ii)) | 7 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 7 |
| Rear Position lamp not working (4.2.1 (a)) | 7 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 7 |
| Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 6 |
| Offside Front Position lamp not working (4.2.1 (a)) | 6 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 6 |
| Horn not working (7.7 (a) (ii)) | 6 |
| Headlamp aim not tested (4.1.2 (b)) | 6 |
| Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Headlamp insecure (4.1.1 (c)) | 5 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 5 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 4 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 4 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 4 |
| Rear Position lamp not working |4.2.1 |a|| | 4 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 4 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Position lamp not working |4.2.1 |a|| | 3 |
| Front brake disc in such a condition that it is seriously weakened | 3 |
| Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 3 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 3 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 3 |
| Front Position lamp not working Both (4.2.1 (a)) | 3 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Nearside Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 3 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 3 |
| Position lamp not working |4.2.1 |a|| | 3 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 3 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 3 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 3 |
| Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Rear Stop lamp not working control (4.3.1 (a) (ii)) | 2 |
| Rear Stop lamp not working stop lamp replaced (4.3.1 (a) (ii)) | 2 |
| Front Brake excessively binding (1.2.1 (f)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Brake performance not tested (1.2.1 (g)) | 2 |
| Offside Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
| Rear brake disc in such a condition that it is seriously weakened | 2 |
| Handlebar excessively deformed (2.2.1 (c) (i)) | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Rear Stop lamp not working control |4.3.1 |a| |ii|| | 2 |
| Horn not working |1.7.3a| | 2 |
| Offside Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Brake caliper has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 2 |
| Offside Handlebar grip insecure to handlebar Accelerator not returning (2.2.1 (d) (ii)) | 2 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 2 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Offside Front Position lamp not working |4.2.1 |a|| | 2 |