Most common failures | No# failures |
---|
Headlamp aim out of alignment | 22 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
Stop lamp remains on when the brake is released |1.3.1e| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 6 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Stop lamp remains on when the brakes are released | 5 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Front Brake disc|s| excessively worn |3.2.A1l| | 4 |
Registration plate lamp issues | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Registration plate issues | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Lower Fork yoke deformed |2.1.1b| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Wheel corroded significantly reducing the original strength |4.2.1a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Wheel alignment incorrect which adversely affects the handling handle bar secure but out of alignment (2.4 (a)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Brake cable has restricted free movement |1.1.15 |e|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Horn control defective steak |1.7.2a| | 1 |
Front position lamp does not illuminate immediately when switched on bulb is not working |1.1.3a| | 1 |
Steering linkage has excessive free play hadnle bar is loos |2.2.2| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Horn control defective |1.7.2a| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
An item not tested |Manual| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Front mudguard insecure Broken with sharp edges |2.3.7| | 1 |
Exhaust excessively deteriorated Heat shield lose |7.1.1a| | 1 |
Horn control defective Sticking on |1.7.2a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Roller brake test indicates a binding brake front brake |3.3.A1a| | 1 |
Roller brake test indicates a binding brake rear brake |3.3.A1a| | 1 |
Roller brake test indicates a sticking brake rear brake |3.3.A1a| | 1 |