Most common failures | No# failures |
---|
Headlamp aim out of alignment | 42 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 26 |
Exhaust is leaking and excessively noisey |7.1.1b| | 24 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 13 |
Registration plate issues | 13 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
Steering headbearing has excessive free play |2.2.2| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 8 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 7 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 7 |
Stop lamp affected by the operation of another lamp |1.3.2| | 6 |
Horn is not a constant note |1.7.3c| | 6 |
Offside Front Direction indicator insecure |1.5.3b| | 6 |
Offside Rear Direction indicator insecure |1.5.3b| | 5 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Rear Brake lever insecure |3.1.2a| | 5 |
Handlebar mounting clamp bolt loose |2.1.1a| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Direction indicators not working |1.5.1c| | 4 |
Riders seat insecure |6.2.1a| | 4 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 4 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Rear reflector on motorcycle missing |1.4.1| | 4 |
Exhaust excessively deteriorated |7.1.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Handlebar mounting clamp loose |2.1.1a| | 4 |
Front Headlamp insecure |1.2.3b| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Brake lever mounting insecure |3.1.2a| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 3 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 3 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Horn sounds harsh or grating |1.7.3c| | 3 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 3 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 3 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Nearside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Upper Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Exhaust excessively deteriorated |7.1.1a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
Stop lamp affected by the operation of the horn |1.3.2| | 2 |
Front Handlebar mounting clamp loose |2.1.1a| | 2 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 2 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 2 |
Rear Brake lever attachment screws loose |3.1.2b| | 2 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Stop lamp deteriorated and function impaired |1.3.3a| | 2 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Front Horn not working |1.7.3a| | 2 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Front Headlamp aim not tested |1.6| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Front Brake lever insecure |3.1.2a| | 2 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Offside Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
An item not tested |Manual| | 1 |
Brake performance not tested |3.3| | 1 |
Nearside Fuel system component leaking |7.2.1a| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Centre Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Exhaust has a major leak of exhaust gases badly corroided |6.1.2 |a|| | 1 |
Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Brake hose damaged | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Front Upper Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Upper Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Rear Upper Direction indicator insecure |1.5.3b| | 1 |
Front Brake fluid not visible |1.1.10 |d| |iii|| | 1 |
Front Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Front Shock absorber has a serious fluid leak both (5.3.2 (b)) | 1 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Front Shock absorber has negligible damping effect very slight movement |5.3.2 |b|| | 1 |
Rear Brake back plate|s| insecure |3.2.A1j| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Rear Brake lever is inoperative |3.1.3c| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Nearside Front Suspension component corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Front Suspension component insecure and control of the motorcycle impaired sized (5.3.3 (a) (ii)) | 1 |
Nearside Rear Brake lever so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
Nearside Rear Brake component insecure cable locking nut (1.1.21 (c)) | 1 |
Centre Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Centre Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Front Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Steering linkage has excessive free play |2.2.2| | 1 |
Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Front Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Nearside Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Front Shock absorber has a serious fluid leak both |5.3.2 |b|| | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Nearside Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Rear position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Brake lever insecure |3.1.2a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Centre Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Exhaust mounting missing |7.1.1c| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride engine to fram bolt poss loose eccesive movememt |6.2.1h| | 1 |
Horn control defective |1.7.2a| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |