MOT History from tests of petrol HONDA SALOONs year 1998

Review the list of common HONDA SALOON failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:25.00%

(The average a petrol HONDA SALOON year 1998 passes without issue)

Based on:8 MOT Tests

Most common failures	No# failures
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	4
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	3
Service brake: efficiency below requirements \|3.7.B.7\|	3
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Exhaust emissions hydrocarbon content after 2nd fast idle excessive \|7.3.D.3\|	2
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Brakes imbalanced across an axle	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	4
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	3
Service brake: efficiency below requirements \|3.7.B.7\|	3
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Exhaust emissions hydrocarbon content after 2nd fast idle excessive \|7.3.D.3\|	2
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Offside Rear fog lamp not working \|1.3.2b\|	2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Rear Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Brakes imbalanced across an axle	1

MOT History from tests of petrol HONDA SALOONs year 1998

Find us on Facebook