MOT History from tests of petrol HONDA S-WINGs year 2007

Review the list of common HONDA S-WING failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:76.47%

(The average a petrol HONDA S-WING year 2007 passes without issue)

Based on:119 MOT Tests

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Nearside Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Nearside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Registration plate lamp issues	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Nearside Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Headlamp aim out of alignment	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Registration plate issues	1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Offside Front Position lamp not working \|4.2.1 \|a\|\|	1
Offside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	1
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	3
Nearside Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	2
Nearside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Steering headbearing has excessive free play \|2.2.2\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Registration plate lamp issues	2
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Horn not working \|7.7 \|a\| \|ii\|\|	1
Nearside Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Offside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Headlamp aim out of alignment	1
Front Roller brake test indicates a binding brake \|3.3.A1a\|	1
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Registration plate issues	1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Offside Front Position lamp not working \|4.2.1 \|a\|\|	1
Offside Handlebar grip insecure to handlebar \|2.2.1 \|d\| \|ii\|\|	1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	1
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Offside Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Front Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1

MOT History from tests of petrol HONDA S-WINGs year 2007

Find us on Facebook