MOT History from tests of petrol HONDA PS125Is year 2006

Review the list of common HONDA PS125I failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:85.15%

(The average a petrol HONDA PS125I year 2006 passes without issue)

Based on:101 MOT Tests

Most common failures	No# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	1
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front wheel bearings are excessively rough \|2.3.5b\|	1
Stop lamp remains on when the brakes are released	1
Throttle operating incorrectly \|6.2.1f\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	1
Horn not working \|1.7.3a\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))	2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Stop lamp remains on when the brake is released \|1.3.1e\|	2
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Nearside Rear Brake lever is so short and the brake cannot be readily applied \|3.1.3c\|	1
Nearside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Offside Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	1
Roller brake test No brake control achieves an efficiency of 30%. \|3.3.A2a\|	1
Front Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Front Front wheel bearings are excessively rough \|2.3.5b\|	1
Stop lamp remains on when the brakes are released	1
Throttle operating incorrectly \|6.2.1f\|	1
Brake lever has inadequate reserve travel \|3.1.3b\|	1
Rear Brake lining\|s\| less than 1.5 mm thick \|3.2.A1f\|i\|\|	1
Horn not working \|1.7.3a\|	1
Rear suspension movement is excessively stiff \|2.4.A.3b\|	1
Rear reflector on motorcycle missing \|1.4.1\|	1

MOT History from tests of petrol HONDA PS125Is year 2006

Find us on Facebook