Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 11 |
Registration plate issues | 6 |
Parking brake: efficiency below requirements |3.7.B.7| | 5 |
Brakes imbalanced across an axle | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 3 |
Registration plate lamp issues | 3 |
Headlamp aim out of alignment | 3 |
Rear parking brake recording little or no effort | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Nearside Rear Macpherson strut corroded and seriously weakened |2.4.G.1| | 2 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Offside Rear fog lamp not working |1.3.2b| | 2 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 2 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Offside Side repeater not working |1.4.A.2c| | 1 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Rear brake binding | 1 |
Offside Front An item not tested |Manual| | 1 |
Offside Rear An item not tested |Manual| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Windscreen has damage | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Seat belt insecurely fixed to the seat |5.2.1a| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Rear brake application uneven | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Headlamp aim beam image too far to the left |1.6.B4| | 1 |
Offside Rear fog lamp excessively deteriorated so that it is not visible from a reasonable distance |1.3.2d| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
Offside Rear Brake linkage has restricted free movement |3.5.1k| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
Rear Rear fog lamp not working |1.3.2b| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Position lamp not working dip (4.2.1 (a) (ii)) | 1 |
Nearside Rear Service brake excessively binding WHEEL WILL NOT TURN BY HAND (1.2.1 (f)) | 1 |
Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
Windscreen washer not working | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
Rear fog lamp missing (4.5.1 (a) (ii)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases centre (6.1.2 (a)) | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Offside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
Nearside Front Floor excessively deteriorated (6.2.4 (a) (i)) | 1 |
Nearside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired (6.2.2 (d) (ii)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill ending (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill ending (6.1.1 (c) (i)) | 1 |
Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced panel (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis above exhaust (6.1.1 (c) (i)) | 1 |
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill ending (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill to arch (6.1.1 (c) (i)) | 1 |
Nearside Rear Service brake imbalanced across an axle (1.2.1 (b) (i)) | 1 |
Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
Brake pedal spongy |3.3.B.1b| | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Braking system leaking Wheel cylinder |3.6.A.1| | 1 |
Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |