>

MOT History from tests of petrol HONDA PES125s year 2010

Review the list of common HONDA PES125 failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history
Pass percent:87.17%
(The average a petrol HONDA PES125 year 2010 passes without issue)
Based on:226 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment4
Front Roller brake test indicates a binding brake |3.3.A1a|3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|3
Stop lamp remains on when the brakes are released3
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|2
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||2
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f||1
Rear Brake lever has insufficient reserve travel left hnd lever pulls to bars |1.1.2 |a||1
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))1
Exhaust silencer insecure Heat shield incorrectly secured (8.1.1 (b) (i))1
Direction indicator not working offside and nearside |1.5.1c|1
Horn not working |1.7.3a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Nearside Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii||1
Rear reflector on motorcycle missing |1.4.1|1
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Rear position lamp incorrect colour |1.1.2b|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Front Brake lever has inadequate reserve travel |3.1.3b|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Headlamp aim not tested |1.6|1
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d|1
Rear Brake excessively binding (1.2.1 (f))1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Wheel alignment incorrect which adversely affects the steering (2.4 (a))1
Rear reflector missing (4.8.2 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy